Pauls 621 Ti

Home Up



S Reg Rover 621 Ti


T16 Engine rebored to 2068cc

GBE Designed forged pistons 86mm with extra hardened floating pins and total seal rings

GBE Designed Forged billet rods

Modified Crank

All Dynamically balanced

Re-conditioned Cylinder Head with 3 angle valve seats and helicoiled exhaust manifold stud holes

Lightened and modified flywheel

ARP hardware

Klinger head gasket

GBE designed turbo elbow and downpipe leading to powerflow 2.5" exhaust


Uprated Walbro fuel pump

Uprated fuel regulator. NOT FSE

Siemens DEKA 660 injectors

Denso IK24 (Grade 8 equivalent) plugs

Magnecor KV85 plug leads

GT2871R roller bearing turbo

GBE custom built Aluminium Radiator

Modified Air conditioning installation to allow Radiator, Condenser and FMIC to be mounted without using bonnet pins

DTA E48EXP Mapped by
GBE / Thor Racing

GBE spec idle / start control valve (makes starting as good as OEM)


Twin Davies Craig slim-line Fans at the front of the radiator

Single 10" Davies Craig slim-line fan at the back of the radiator

Twin Piston Dump Valve

Battery to boot

Stebtek throttle body bracket

GBE cold air box and ITG filter


Re-built gearbox with steel caged diff bearings

GBE spec semi-race clutch with organic plate

Polyurethene Linkage Stabiliser bushes


Black diamond grooved disks and Pagid fast road pads

Chassis dynamics springs and Bilstein dampers (lowered approx 40mm)

KEI Aerospeed Velocity wheels (Shadow)

Toyo proxes 215/40 x 18 tyres

GBE poly bush set including anti torque steer bushes


Grandad Gold paintwork (gotta be worth 15

Meshed grille (eventually)

Honda accord spoiler

Laguna splitter

Electric aerial removed and rear wing plated

Bee sting aerial fitted


Dynamat extreme (LOTS of dynamat extreme)

Boost gauge in a pillar pod

Digital Temp gauge with 3 switched sensors ( charge, external, internal)

AVC-r electronic boost controller in custom made panel (Off = 10 PSI, Mode A = 15 PSI, Mode B = 22 PSI )

Conrad-Anderson CM25 triple memory Cruise Control

Brodit / Ipaq SatNav

Parrot Bluetooth handsfree kit

AVC-r "Scrambler" switch (Re-heat)

On the way

Willwood 330mm Grooved disks and 4 pot calipers